|
Electronic ballast in 19" technology for use with
200 W, 575 W or 1200 W Metal Halide Lamps
|
- Available for all Event
daylight lamps in
conjunction with multicore technology and for all conventional daylight
lamps in conjunction with
Location Splitbox.
- Only operates with
specially designed
19" cabinet racks or flight cases.
- In case of failure
special cartridges containing
two power units of 600 W can be replaced easily.
- Lamp power constant
controlled for steady
light quality independent of line voltage and
of bulb age.
- Flicker free operation
by use of 200 Hz square
wave current.
- Typical light ripple
max. 3%.
- Dimming in range of
50 - 100% of nominal
lamp power.
- With active line filter
(PFC) for minimized apparent
power and reduced disturbances of power supply
network.
- Large range for input
voltage
ULN = 90 - 135V~ / 180 - 250 V~ ; 3-Phase.
- Protection against
line overvoltage and overtemperature
- Lamp outlet protected
against no-load conditions and short circuit.
- Each module can also
be operated by
digital remote control(DMX 512).
|
Removable Cartridge |
Technical Data |
|
Lamp Power |
6 x 200W or 6 x 575 W or 3 x 1200 W or mixed |
Supply Voltage |
ULN = 90 - 135 V~ / 180 - 250 V~ (3,N,PE) |
Line Power |
4200 VA (max.) |
Power Factor |
cos φ ≈ 0,98 |
Dimensions (whd) |
19 4 HE 545 mm (1 HE = 44.5 mm) |
Weight |
approx. 20 kg |
|