EB 575/1200 universal
with active line filter (PFC)

Electronic ballast for use with 575 W and 1200 W
Metal Halide Lamps

• Available for daylight lamps of all well-known manufacturers.
• Automatic detection of the connected luminaires 575W and
  1200 W
• Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
  
• Flicker free operation by use of 75 Hz square wave current.
  
• Optionally equipped with 300 Hz operation mode for use with
  digital 'high speed' cameras.
• Typical light ripple max. 3% .
  
• Dimming in range of 50 - 100% of nominal lamp power.
• With active line filter (PFC) for minimized apparent power
  and reduced disturbances of power supply network
• Large range for input voltage 90 - 125V~ / 180 - 250 V~
  (auto - switching).
• Protection against line overvoltage and overtemperature.
• Lamp outlet protected against no-load conditions and short circuit.
• Solid aluminum construction with outside inside heat sinks.
• Very silent due to temperature regulated fan.
  
• Optionally equipped with digital remote control (DMX 512).