|
Electronic ballast for use with 24000 W Metal Halide lamps |
- Available for daylight
lamps of all well-known manufacturers.
- Lamp power constant
controlled for steady light quality
independent
of line voltage and of the age of the bulb used.
- Flicker free operation
by use of 75 Hz square wave current.
- Typical light ripple
max. 3%.
- Additional `low-noise`
modes (50 Hz / 60 Hz) to reduce
the noise that
might occur in the lamp head.
- Optionally equipped with 300 Hz operation mode for use with
digital
'high speed' cameras.
- Arc Control
to prevent unintended resonance arising
inside bulbs of different designs.
- Dimming in range of
50 - 100% of nominal lamp power.
- With active line filter
(PFC) for minimized apparent power
and reduced disturbances
of power supply network.
- Large range for input
voltage 190 - 250 V~.
- Protection against
line overvoltage and overtemperature.
- Lamp outlet protected
against no-load conditions and
short circuit.
- Solid aluminum construction
with outside heat sinks.
- Very silent due to
temperature regulated fans.
- Optionally equipped
with digital remote control (DMX512).
- Caddie for transport
included.
|
|
Technical
Data |
|
Lamp
Power |
24000
W |
Supply
Voltage |
190 -
250 V~ 50 / 60 Hz 1,N,PE |
Line
Power |
25000 VA (max.)
|
Power
Factor |
cos φ ≈ 0.98 |
Dimensions
(whd) |
363
598 476 mm |
Weight |
approx.
57 kg (72 kg inkl. Caddie) |
|