|
Electronic ballast for use with 125 W and 200 W
Metal Halide Lamps |
- Available for daylight
lamps of all well-known manufacturers.
- Automatic detection
of the connected luminaires 125 W and
200 W.
- Lamp power constant
controlled for steady light quality
independent of line voltage and of the age of the bulb used.
- Flicker free operation
by use of 200 Hz square wave current.
- Typical light ripple
max. 3% .
- Dimming in range of
70 - 100% of nominal lamp power.
- With active line filter
(PFC) for minimized apparent power
and
reduced disturbances of Power supply network.
- Large range for input voltage 90 - 130 V~ / 180 - 250 V~
(auto-switching)
- Protection against
line overvoltage and overtemperature.
- Lamp outlet protected
against no-load conditions and
short circuit.
- Solid aluminum construction
witch inside heat sinks.
|
|
Technical
Data |
|
Lamp
Power |
125
W / 200 W |
Supply
Voltage |
90 - 130 V~ / 180 - 250 V~ 50/60 Hz 1,N,PE |
Line
Power |
125 W: 150 VA (max.)
200 W: 240 VA (max.) |
Power
Factor |
cos φ ≈0.98 |
Dimensions
(whd) |
130 65 240 mm |
Weight |
approx. 1.9 kg |
|