|
Electronic ballast for use with 1200 W and 1800 W
Metal Halide Lamps |
- Available for daylight
lamps of all well-known manufacturers.
- Automatic detection
of the connected luminaires
1200 W and
1800 W
- Lamp power constant
controlled for steady light quality independent
of line voltage and of the age of the bulb used.
- Flicker free operation
by use of 75 Hz square wave current.
- Typical light ripple
max. 3% .
- Dimming in range of
50 - 100% of nominal lamp power.
- With active line filter
(PFC) for minimized apparent power
and reduced disturbances of power supply network.
- CCL (Compensation of Cable Losses)
The CCL function compensates the electrical losses on head to ballast cables by
automatically increasing the output power (only in conjunction with suitable 1800
W luminaires).
- Large range for input
voltage 90 - 130V~ / 180 - 250 V~
(auto - switching).
- Protection against
line overvoltage and overtemperature.
- Lamp outlet protected
against no-load conditions and short circuit.
- Solid aluminum construction
with inside heat sinks.
- Very silent due to
temperature regulated fan.
- Optionally equipped
with digital remote control (DMX 512).
|
 |
| Technical
Data |
|
| Lamp
Power |
1200 / 1800 W |
| Supply
Voltage |
90 - 130V~ / 180 -
250 V~ 50 / 60 Hz 1,N,PE |
| Line
Power |
2600 VA (max.) |
| Power
Factor |
cos φ ≈ 0.98 |
Dimensions
(w•h•d) |
200
•156• 335 mm |
| Weight |
approx.
8 kg |
|