EB 12/18 Universal

Electronic ballast for use with 12000 W and 18000 W Metal Halide Lamps

  • Available for daylight lamps of all well-known manufacturers.
  • Electronic detection of the used lamp types 12000 W and
    18000 W.
  • Lamp power constant controlled for steady light quality independent of line voltage and of the age of the bulb used.
  • Flicker free operation by use of 75 Hz square wave current.
  • Typical light ripple max. 3%.
  • Additional `low-noise` modes (50 Hz / 60 Hz) to reduce
    the noise that might occur in the lamp head.
  • Optionally equipped with 300 Hz operation mode for use
    with digital 'high speed' cameras.
  • “Arc Control” to prevent unintended resonance arising
    inside bulbs of different designs.
  • Dimming in range of 50 - 100% of nominal lamp power.
  • With active line filter (PFC) for minimized apparent power
    and reduced disturbances of power supply network.
  • Large range for input voltage 190 - 250 V~.
  • Protection against line overvoltage and overtemperature.
  • Lamp outlet protected against no-load conditions and
    short circuit.
  • Solid aluminum construction with outside heat sinks.
  • Very silent due to temperature regulated fans.
  • Optionally equipped with digital remote control (DMX512).
  • Caddie for transport included.
Technische Daten
Lampenleistung 12000 W / 18000 W
Netzspannung 190 - 250 V~ 50 / 60 Hz 1,N,PE
Eingangsleistung 12 kW: 13000 VA (max.)
18 kW: 19400 VA (max.)
Leistungsfaktor cos φ ≈ 0,98
Abmessungen (B•H•T) 363 • 598 • 476 mm
Gewicht ca. 50 kg (65 kg inkl. Caddie)